Up!
Note
|
WARNING
|
Carry out following work: |
l | A-pillar has been renewed. |
l | Always renew bolts. Loosening it once to adjust door is allowed. |
Install in reverse order of removal. To this end, the following should be observed: |
– | Insert door -1- and tighten bolts -2-,-3-, -6- and -7- to specified torque of 20 Nm + 90°. |
Specified torque for bolts -2-: 20 Nm + 90°. |
Specified torque for bolts -4-: 23 Nm. |
– | Adjust front door → Chapter. |
– | Observe front door gaps → Rep. gr.00. |