| t
| If an undamaged window is being re-used, cut back the residual adhesive sealant to 1 to 2 mm shortly before bonding it back in. Do not damage primer and ceramic coating when doing this. |
| t
| The remaining material is required as a base for the new adhesive sealing material. |
WARNING | Exception: if bonding is performed later than one day after cutting back adhesive bead, the remaining residual material must be activated with activator. |
| Apply activator evenly in one stroke using applicator. |
| Activator must not come in contact with paint, or the paintwork will be damaged. |
| Drying time approx. 10 minutes |
|
| Exception: if bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator -D 181 801 A1-. |
|
|
|
Note
