Up!
Assembly overview - rear seat backrest |
1 - | Rear seat backrest |
q | Removing and installing → Chapter |
2 - | Outer bearing sleeve |
3 - | Bolt |
q | 7 Nm |
4 - | Locking mechanism |
q | For rear seat backrest |
q | Removing and installing → Chapter |
5 - | Trim |
q | For locking mechanism |
q | Removing and installing → Chapter |
q | Press until it audibly engages. |
6 - | Head restraint |
q | Removing and installing → Chapter |
q | Push to lowest position in rear seat backrest. |
q | Must be locked in head restraint guides. |
7 - | Head restraint guide |
q | With release tab |
q | Without release tab |
q | Removing and installing → Chapter |
q | Guide lug must engage in recess in backrest frame mounting. |
q | Locking tab must engage in backrest frame. |
8 - | Cover |
q | For centre mount |
q | Removing and installing → Chapter |
q | Press until it audibly engages. |
9 - | Catch |
q | For centre mount |
q | Removing and installing → Chapter |
10 - | Bolt |
q | 8 Nm |
11 - | Mounting pin, inner |
q | For rear seat backrest |
q | 13.5 Nm |
12 - | Backrest centre mount |