Up!
Assembly overview - cover and cushion for seat pan |
1 - | Seat pan |
2 - | Seat cushion |
q | Removing and installing seat cover with seat cushion → Chapter |
q | Separating and assembling seat cover and seat cushion → Chapter |
3 - | Wire |
q | Encased in foam in seat cushion |
q | For attaching seat cover to seat cushion |
4 - | Shaped rail |
q | Sewn to seat cover |
q | For attaching seat cover to seat cushion |
5 - | Upholstery clip |
q | For attaching seat cover to seat cushion |
q | Renewing |
q | When installing, fit in same location using upholstery clip pliers -V.A.G 1634-. |
6 - | Seat cover |
q | Removing and installing seat cover with seat cushion → Chapter |
q | Assignment → Electronic parts catalogue |
q | After installation, check that there are no creases in seat. |
7 - | Gripper |
q | Sewn to seat cover |
q | For attaching seat cover to upper frame of seat pan |
q | Check that it sits correctly in upper frame of seat pan. |
8 - | Tensioning straps |
q | For securing seat cover to seat cushion |
9 - | Rear gripper |
q | Sewn to seat cover |
q | For attaching seat cover to wire mat of seat pan |
q | Check that it sits correctly on wire mat of seat pan. |