Volkswagen Workshop Service and Repair Manuals > Up! > Body | General body repairs, interior | Trim, noise insulation | Interior trims | Removing and installing A-pillar trim | Removing and installing driver side parking permit bracket

Removing and installing driver side parking permit bracket

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1783-

Removing

–	Remove upper A-pillar trim → Chapter.

–	Unscrew bolt -1- (1.5 Nm).

–	Remove parking permit bracket -2-.

Installing

–	Install in reverse order of removal.

Note

Before installing, check securing element -3- for damage and renew if necessary.

Volkswagen Workshop Service and Repair Manuals