Up!
| Assembly overview - clutch hydraulics |
| 1 - | Brake fluid reservoir |
| q | Availability → Electronic parts catalogue (ETKA) |
| 2 - | Supply hose |
| 3 - | Seal |
| q | Seals and supply hose are listed as one replacement part. |
| q | The seals must be located in supply hose |
| 4 - | Clutch master cylinder |
| q | Availability → Electronic parts catalogue (ETKA) |
| q | Removing and installing → Chapter |
| 5 - | Clip |
| q | Pull clip out to stop to remove pipe/hose line |
| 6 - | Mounting bracket with clutch pedal |
| q | Availability → Electronic parts catalogue (ETKA) |
| 7 - | Bearing shaft |
| q | Availability → Electronic parts catalogue (ETKA) |
| q | For plunger/clutch master cylinder |
| 8 - | Hexagon nut |
| q | → Item |
| 9 - | Seal / O-ring |
| q | Pull onto line connection |
| q | Insert with brake fluid |
| q | Seals/O-rings are adapted to material of line connection → Fig. |
| q | Allocation → Electronic parts catalogue (ETKA) |
| 10 - | Pipe line |
| q | Availability → Electronic parts catalogue (ETKA) |
| 11 - | Brake lines |
| q | Various number |
| q | Allocation → Electronic parts catalogue (ETKA) |
| 12 - | Bracket |
| q | Secured to body |
| q | For brake lines and pipe/hose line |
| 13 - | Hexagon bolt |
| q | → Item |
| 14 - | Clip |
| q | To remove pipe, pull out clip to stop. |
| 15 - | Bleeder valve |
| q | Bleeding clutch mechanism → Chapter |
| 16 - | Dust cap |
| 17 - | Clutch slave cylinder |
| q | Allocation → Electronic parts catalogue (ETKA) |
| q | Removing and installing → Chapter |
|
|
| Item | Material of line connection |
| 1 | Line connection with circumferential groove -arrow 1- |
| 2 | Line connection with shoulder -arrow 2- |
| 3 | Line connection with shoulder -arrow 2- and circumferential groove -arrow 3- |
|
