volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking oil pressure and oil pressure switch > < Removing and installing oil filter housing

Up!

Removing and installing oil pressure switch
Removing and installing oil pressure switch
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
Removing
  Caution
The alternator must be covered with a cloth in order to avoid damage due to spilled engine oil.
–  Pull off connector -1-.
  W00-0427
–  Unscrew oil pressure switch -2- from cylinder head.
Installing
–  Screw oil pressure switch -2- into cylinder head and tighten to 20 Nm.
  N17-10299
–  Reconnect connector -1-.
–  Remove cloth from alternator.
  N17-10299

Checking oil pressure and oil pressure switch > < Removing and installing oil filter housing