Volkswagen Workshop Service and Repair Manuals > Up! > Power unit | 3 cyl. injection engine, toothed belt drive (4 valves) | Exhaust system | Cleansing exhaust emissions | Removing and installing catalytic converter | Assembly sequence for mounting catalytic converter to cylinder head

Assembly sequence for mounting catalytic converter to cylinder head

Note

Before installing, coat threads of lock nuts and stud bolts with high-temperature paste -N 052.112.00- according to TL 521 12.

–	Fit bracket -10- to cylinder block and tighten to 23 Nm.

–	Loosely fit bracket -11- to bracket -10-.

–	Guide gasket -2- onto stud bolts.

–	Loosely install nuts -4-.

–	Tighten 3 nuts -4- to 23 Nm.

–	Bolt bracket -11- to catalytic converter.

–	Tighten bolt -8- to 23 Nm.

–	Bolt bracket -11- to bracket -10- and tighten to 23 Nm.

–	Tighten remaining nut -4- to 23 Nm.

Volkswagen Workshop Service and Repair Manuals