Up!
Assembly overview - wheel bearing |
1 - | Drive shaft |
2 - | Wheel bearing housing |
q | Removing and installing → Chapter. |
q | Allocation → Electronic parts catalogue „ETKA“ |
3 - | Hexagon socket head bolt |
q | 8 Nm |
4 - | Speed sensor |
q | Before inserting sensor, clean inner surface of hole and coat with lubricating paste -G 000 650-. |
5 - | Brake disc |
6 - | Wheel hub |
q | Removing and installing → Chapter. |
7 - | Retaining ring |
q | Installed with opening facing downwards. |
8 - | Wheel bearing |
q | Removing and installing → Chapter. |
9 - | Bolt |
q | 12 Nm |
10 - | Splash plate for brakes |
11 - | Bolt |
q | 4.5 Nm |
12 - | 12-point nut (self-locking) |
q | 50 Nm + 45° further |
q | Always renew after removing. |