Up!
Assembly overview - wheel bearing housing, wheel bearing unit |
1 - | Axle beam |
q | Removing and installing → Chapter. |
2 - | Brake backplate with brake shoes |
3 - | Bolt |
q | 30 Nm + 90° further |
q | Always renew after removing. |
4 - | Stub axle |
q | Straightening operations are not permitted. |
q | Recutting the thread is not permitted |
5 - | Wheel hub with wheel bearing |
q | The ABS sensor ring is installed in the wheel hub |
q | Removing and installing → Chapter. |
The wheel bearing and wheel hub are assembled in one housing. |
The wheel hub with wheel bearing unit is maintenance and adjustment-free. Adjustments and repairs are not possible! |
6 - | Twelve-point nut |
q | Self-locking |
q | 70 Nm + 30° further |
q | Always renew after removing. |
7 - | Grease cap |
q | Always renew after removing. |
q | Pressing off and driving in → Chapter |
A proper seal can be achieved only by installing a new grease cap. |
This is essential for optimum function and service life of wheel bearing. |
8 - | Brake drum |
9 - | Bolt |
q | 8 Nm |