Up!
Assembly overview - steering column, steering column on central pipe of dash panel |
Note
t | It is not permitted to carry out welding and straightening operations on load-bearing or wheel-guiding suspension components. |
t | Always renew self-locking nuts. |
t | Always renew corroded nuts and bolts. |
1 - | Central pipe of dash panel |
2 - | Nut |
3 - | Bolt |
q | 20 Nm |
4 - | Steering column |
q | Removing and installing → Chapter. |
q | Can be tested in guided fault finding using → Vehicle diagnostic tester |
Note
Before renewing the steering column or the steering column electronics control unit -J527- all causes of entries in event memory must be rectified → Vehicle diagnostic tester. |
5 - | Crash strut |
q | Allocation → Electronic parts catalogue „ETKA“ |
6 - | Bolt |
q | 20 Nm |