volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Steering box > < Removing and installing ESL control unit

Up!

Removing and installing intermediate steering shaft
Removing and installing intermediate steering shaft
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
Carry out the following work:
Removing
  W00-0427
–  Unscrew bolts -1- and remove footwell trim -2-.
  N48-10670
–  Unscrew bolt -arrow- from universal joint -1- and pull off universal joint in -direction of arrow-.
  N48-10671
–  Remove bolt -1-.
–  Pull steering column articulated shaft -2- in -direction of arrow- off steering column and remove.
Installing
–  Install in reverse order.
  N48-10688
Specified torques
ComponentSpecified torque
Steering column articulated shaft to steering box
t  Use new bolts.
20 Nm + 180° further
Steering column articulated shaft to steering column
t  Use new bolts.
20 Nm + 180° further

   

Steering box > < Removing and installing ESL control unit