Volkswagen Workshop Service and Repair Manuals > Up! > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Lights and controls in the roof trim | Removing and installing bulbs for front interior and reading light | Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof

Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof

Special tools and workshop equipment required

t	Removal wedge -VAS 3409-

Note

t	When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available masking tape.

t	The front interior light -W1- has to be removed in order to change its bulb.

Removing:

–	Switch off ignition and all electrical loads, and pull out ignition key.

–	Remove front interior and reading light → Chapter.

–	Turn bulb holder -2- together with bulb of front interior light -W1- in -direction of arrow- and then remove.

–	Pull bulb -1- in -direction of arrow- out of bulb holder -2-.

Bulb for front interior light -W1-: glass base bulb 12V, 5W.

Installing:

Installation is carried out in reverse order of removal.