volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Immobilizer > < Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof

Up!

Removing and installing front reading light
Removing and installing front reading light
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available masking tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove front interior and reading light → Chapter.
  W00-0016
–  Turn bulb holder -1- together with bulb of reading light in -direction of arrow- and then remove.
  N96-11015
–  Pull bulb -1- in -direction of arrow- out of bulb holder -2-.
Renewing bulb for front passenger reading light -W13- or driver side reading light -W19-: glass base bulb 12V, 5W
Installing:
Installation is carried out in reverse order of removal.
  N96-10413

Immobilizer > < Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof