volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting spray jets > < Removing and installing windscreen washer pump

Up!

Removing and installing washer jets
Removing and installing washer jets
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
   
–  Push spray jet upwards -arrow A- and pull out of front flap -arrow B-.
  N92-10469
–  Release securing clip -3- and pull hose connection -2- off spray jet.
–  Depending on the equipment, release and pull off connector -1- and then remove spray jet.
Installing:
  N92-10468
–  Depending on the equipment, reconnect plug-in connection -1-.
–  Fit hose connection -2- onto spray jet and lock hose clip -3-.
–  Starting at the top, push spray jet into mounting hole until it locks in place audibly.
–  Adjust spray jets → Chapter.
  N92-10468

Adjusting spray jets > < Removing and installing windscreen washer pump