WARNING | It is not permissible to test or charge batteries whose colour indicator is light yellow. Do not slave/jump start the vehicle! |
| Danger of explosion when checking and charging or slave/jump starting. |
| These batteries must be renewed. |
|
| –
| Select „Guarantee test“ in the menu. |
| –
| Select „In vehicle“ or „Outside vehicle“. |
| –
| Select „On battery terminal“ or „On jump-start point“. |
| –
| Scan in 2D code of battery or manually select battery type and amperage. |
| –
| Measure temperature. Hold temperature sensor about 5 cm above one battery terminal until temperature stabilises. |
| –
| Print out test log if necessary. |
|
|
|
