Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
Flex Plate: Technical Service Bulletins
Flywheel Mounting Bolt - Torque
Group: 13
Number: 93-03
Date: July 31, 1993
Subject:
Flywheel Mounting Bolts, Torque Revision
Model(s):
4 Cylinder vehicles shown in chart
The procedure for tightening the bolts that secure the flywheel or driveplate to the crankshaft has been revised for those vehicles/transmissions listed
above.
Tighten these bolts as follows:
60 N-m (44 ft.lb.) + a quarter additional turn (90~)
^
Always use new bolts (which are coated with locking compound)
^
The additional quarter turn can be applied in stages rather than in one motion.