240 L4-2.3L SOHC VIN 88 B230F (1986)
Tighten bolts Reconnect link rod
Remove guide pieces from tailgate sides
Install new striker plate
Adjust tailgate back and forth.
Adjust striker plate as needed.
NOTE:
If necessary, adjust horizontal position of tailgate by adjusting hinge position:
-
detach headliner. Remove one hinge bolt; loosen other two.
-
position tailgate; tighten bolts.
Loosely install guide bracket (sliding fit)
Close tailgate to align bracket. Carefully open tailgate and tighten bolts.
Check:
-
that safety catch functions (same as side doors)
-
that tailgate can be locked with key (check central locking function as applicable).
Install:
-
tailgate trim
-
cover
-
plastic handle