740 L4-2.3L SOHC VIN 88 B230F (1985)
Perform A17-A18
Tap out rack seal and spacer from tube
A19
Use a 25 mm outer dia. socket.
Insert two long extensions in valve housing and tap out seal and spacer.
CAUTION:
Take care not to damage inner surface of valve housing.
Perform A20
A21
Remove from valve assembly:
1
5179
2
dust cover
3
lock ring
4
seal
5
upper bearing (plastic bushing)
NOTE:
Teflon rings 6 are not stocked by Volvo Parts. The 4 teflon rings 6 on the spool valve must not be replaced. The rings do not normally wear
out, but if they do, the complete steering gear should be replaced.
A22
Clean valve assembly
Inspect Teflon rings 6 for wear/score marks, etc.
A23
Clean/inspect all parts
Check rubber bellows and replace if necessary.
NOTE:
Carefully clean threads in valve housing especially where pretension assembly is located.