760 L6-2383cc 2.4L DSL Turbo D24T (1983)
4. Use a screwdriver to pry out seal.
5. Install new seal. Use drift P/N 2412.
6. Press on the drive flange Use tool P/N 1845.
7. Install drive flange nut. Torque nut to 175 Nm (128 ft lb).
8. Reconnect propeller shaft.
Cleaning Oil (Fine) Filter
1. Remove transmission crossmember assembly. Use a lift to support the transmission.
2. Remove oil pan and filter. Use a vessel to collect the oil.