850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Make sure cardboard is in place.
Remove upper mounting clips from panel.
Loosen up the panel by turning the clips 90 degrees in either direction.
Reinstall clips in tailgate.
5
Install reinforcement
Inspect all clip mounts and remove all loose pieces
Note!
Do not drill holes in tailgate panel. Use the screws to make the holes. If pre-drilled, the material may strip when the screw is mounted in the hole
Secure the plate as per illustration. Do not overtighten screws.
Reinstall tailgate panel and removed parts in reverse order.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.
