850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Remove:
-
locking clip to power brake booster push rod.
-
the four nuts holding the power brake booster to the firewall.
-
power brake booster.
NOTE: Note the seal between the power brake booster and firewall.
[LE16]
Note!
Check car chassis number. USA/Canada, 4-door up to chassis no.60654 USA/Canada, 5-door up to chassis no. 258 Europe, 4-door up to
chassis no.76400 Europe, 5-door up to chassis no. 2800
In cars with chassis number lower than above:
-
Check that power brake booster pushrod seat in master cylinder (see illustration) has not stuck to end of power brake booster pushrod.
If seat has stuck, replace master cylinder. Do not put seat back into master cylinder.
In cars with chassis number higher than above:
-
Seats are not supplied as a separate replacement part.
This applies to all master cylinders as replacement parts.
Installing new power brake booster [LE17]
