volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Power Brake Booster (LHD) Replacement [LD]|Page 4960 > < Power Brake Booster (LHD) Replacement [LD]|Page 4958
Page 9
background image

Install:

-

protective cover under engine (some models only).

-

bolt to negative lead clip on frame member.

-

cable pipe to subframe.

In cars with turbo [LE21]:

-

Install turbocharger air pipe on hose connection at lower intercooler connection.

[LE22]

Install:

-

front protective cover. Press cover into position on frame edge. Push it forwards and press up at the back so cover guide fits into its track.

-

Install bolts.

Installing gaiter, nut, bolt and locking lugs [LE23]

Install:

-

gaiter to steering wheel column joint/body opening. Make sure that gaiter is properly in place. Press gaiter circlip home and bend back top of
gaiter.

-

steering wheel column to steering wheel shaft. Use new locking nut. Tighten to 20 Nm (15 ft.lb). Install locking lugs.

Installing sound wall (insulation) [LE24]
In cars with SRS:

-

Install knee guard. Tighten to 20 Nm (15 ft.lb).

-

Install sound wall.

Power Brake Booster (LHD) Replacement [LD]|Page 4960 > < Power Brake Booster (LHD) Replacement [LD]|Page 4958