850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Install the other standard screws, using new screws, and tighten to 45 Nm (33 ft lb).
-
Replace the three special screws with new standard screws and tighten diagonally to: 45 Nm (33 ft lb)
-
Angle tighten all screws an additional: 65°
Automatic Transmission:
-
Install the drive plate, tighten in two stages:
Tighten to: 45 Nm (33 ft lb)
Angle tighten: 50°