850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Camshaft Oil Seal: Service and Repair
Special Tools:
-
Counterhold tool No. 999 5199, or equivalent
-
Drift tool No. 999 5449, or equivalent
-
Drift tool No. 999 5450, or equivalent
-
Locking tool No. 999 5451, or equivalent
-
Locking tool No. 999 5452, or equivalent
-
Extractor tool No. 999 5919, or equivalent
NOTE: For additional information on special tools and equipment used in this procedure, refer to Service and Repair. See: Tools and Equipment/Tools
For Engine Service and Repair
Procedures
NOTE:
-
For front seal replacement, refer to steps 1-10
-
For rear seal replacement, refer to steps 11-13
Front Seal
1. Remove:
-
spark plug cover
-
two fuel pipe clips
-
lift expansion tank, place on engine
-
front timing cover
-
right front wheel
Undo right wing liner to expose vibration damper.
2. Turn engine crankshaft clockwise:
-
Align cam/crankshaft timing marks until all timing marks are aligned.
-
Remove upper timing cover.