850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
12. Install front camshaft seals:
-
Use drift tool No. 999 5449, or equivalent.
-
Grease seal.
-
Tap seal into place.
-
The most recent model of drift tool No. 999 5449, or equivalent is made of plastic.
13. Install camshaft pulley
-
Locate upper timing cover
-
Install camshaft pulley, align timing marks.
-
Tighten the two screws until they are just touching the camshaft pulley.
-
Remove upper timing cover.
NOTE: Check that the camshaft screw holes are centered, as illustrated.
14. Install timing belt:
-
Install tensioner, tighten to 25 Nm (18 ft lb).
-
Place belt over camshaft pulleys, around water pump and press belt over the tensioner pulley.
-
Slacken the two camshaft pulley screws.
-
Remove locking pin from tensioner.
-
Push the belt hard or strike it twice with a plastic mallet in the directions indicated by arrows 1 and 2.