850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Vacuum hose from pressure regulator.
-
Screws holding fuel rail.
-
Lift the fuel rail twisting it carefully. Hook the middle injector behind the sealing moulding, mounted on the draining channel.
Note:
Handle injectors carefully so as not to damage fuel jets and fuel needles. Keep any rubber insulators in the intake manifold.
Removing engine coolant fan (FC)
Remove:
-
Front air intake and inlet hose to the air cleaner (ACL).
-
Air duct to the control modules box.
-
Engine coolant fan (FC) screws (4).
Lift the upper air guide with the relay out of position.
Remove the two spacer washers located above.
Remove:
-
Charge air pipe between the intercooler (CAC) and hose on the throttle body (TB).
-
Two screws retaining the EVAP valve.
-
EVAP hose from the clips on the FC shroud.
Engines with EGR systems:
Pull the EGR converter out of the track from upper air guide.
All:
