volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Intake Manifold Gasket - Replacement|Page 2156 > < Intake Manifold Gasket - Replacement|Page 2154
Page 4
background image

Disconnect the two connectors to the FC.

Remove the cable from the tie strap and the clip on the FC shroud.

Place the air guide with the relay on the engine 

Remove the FC. Pull FC and shroud upward.

Cover the radiator with protective panel P/N 999 5474-5.

Removing hoses and connectors

Remove:

-

Idle air control (IAC) valve and throttle position (TP) sensor connectors.

-

Hose to brake servo cylinder.

-

Hoses from multi-nipple and intake manifold.

-

Disconnect EGR temperature sensor.

-

Injector cable harness tie strap.

Removing intake manifold

Remove:

-

Intake manifold three upper bolts.

-

Dipstick and mounting from intake manifold.

Intake Manifold Gasket - Replacement|Page 2156 > < Intake Manifold Gasket - Replacement|Page 2154