volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Thermostat Gasket, Engine Cooling > < Intake Manifold Gasket - Replacement|Page 2157
Page 7
background image

Reinstall:

-

Two spacer washers in the tracks

-

Engine coolant fan (FC) shroud and upper air guide with four screws.

-

Throttle control cable.

-

Throttle pulley cover.

-

Air duct to the control modules box.

-

Air intake and intake hose for air cleaner (ACL).

Reinstalling fuel rail

Reinstall:

-

All rubber insulators in the intake manifold.

-

Fuel rail and two fuel line damps.

-

New screws and tighten to 10 Nm (7.4 ft.lbs).

-

Remove tools holding injectors.

-

Remove tie strap.

-

Pressure regulator vacuum hose.

-

Connectors on injectors. Check that there is a rubber seal in each connector.

-

Fuel rail cover.

Reinstall:

-

Battery negative lead.

Verify operation.

Reprogram radio.

Thermostat Gasket, Engine Cooling > < Intake Manifold Gasket - Replacement|Page 2157