850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
11. Tap out O-ring retainer from pump housing. Use drift.
12. Wash and inspect all components thoroughly. Replace damaged or worn components.
CAUTION: Always oil new components, as well as machined surfaces of pump housing, with ATF fluid prior to installation.
NOTE: O-rings/seals must be replaced in all cases. Oil components prior to installation.
Assemble
Tool Required
^
999 5515 Drift
^
999 5184 Drift
^
999 5444 Press Tool
1. Mount bearing on shaft. Support bearing inner race with drift. Press bearing onto shaft, ensuring that it is installed in same position as before.
