940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Removal of drive cable to front motor
-
Remove drive cables from motor and drive gear.
Center motor:
Removal of drive cable to center motor
-
Lay seat on nght side.
-
Remove right drive gear.
Removal
-
Remove the two outer nuts.
-
Remove the two screws.
-
Remove locking clip.
Removal of drive cables from motor and drive gear
-
Remove drive cables from motor and drive gear. It is fixed with four screws.
Replace: