940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Final drive housing, complete
The final drive housing is made of modular cast iron with an aluminium cover. The cover is provided with integral pins for the bushings.
The new designations are:
-
1055, without differential lock
-
1065, with differential lock
New components
-
New type of drive flange
-
New pinion for propeller shaft with locating pin
-
New pinion seal
-
New differentials, with and without differential lock
-
New crown wheel bolts
-
New locking plate for crown wheel bolts
The oil thrower has been eliminated.
Drive shaft
Two versions of drive shaft are available, one for the 2.5-litre and one for the 3-litre engine.
The drive shafts are not provided with drive flanges or bolted joints. Each comprises a unit which is attached to the differential gear by means of a snap
ring.
Specifications, Final Drive