volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10930 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10928
Page 3
background image

Remove the 2 screws for the striker plates on both the left and right-hand sides.
Replace the tension bow.

Installing the tension bow 
Install in reverse order.
Place paper between the tension bow and the cover. Lower the tension bow to the closed position. Check that there are no gaps between the tension bow
and the cover.

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10930 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10928