C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
the cross stay between the suspension turrets
-
the air hose from the air cleaner (ACL) to the turbocharger (TC). Place to one side. Seal the openings
-
place the air cleaner (ACL) cover to one side
-
the charge air pipe over the engine. Seal the openings
-
the cover over the ignition coils -the upper torque rod bracket
-
the camshaft position sensor (CMP) housing and trigger wheel.
Replacing The Rear Camshaft Seal
Pull out the seal. Use puller 999 5919. Use emery cloth 951 1024 to clean the shaft journal and mating surface.
NOTE: When cleaning work around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other contaminants are
