C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Remove:
-
the filter insert from the housing
-
the O-ring that seals between the housing and the oil trough.
Allow the filter insert to drain and then discard it in an approved place.
Install the new filter
-
Clean the housing.
-
Install a new filter insert.
-
Install a new O-ring.
-
Lubricate the O-ring.
-
Screw the filter housing into place.
Tighten with 25 Nm .
Fill engine oil
Top up oil.
Checking performed work
Start the engine and check:
Start the engine and check for oil leakage.
Stop the engine and give the oil time to run down into the oil trough.
Then check the oil level.
Top up if needed, but do not overfill.
Wipe the engine compartment clean.
Ensure that the steering wheel and gear selector lever are clean.