C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Oil Filter: Removal and Replacement
Oil/oil filter, replacing.
Special tools:
999 5679 Oil filter spanner See: Tools and Equipment/999 5679 Oil Filter Spanner
Oil/oil filter, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Drain the engine oil.
Lift up the car and get an oil container.
Position the container under the engine oil trough.
Remove the oil plug.
Drain the engine oil.
It is easier to drain the oil if the engine is at operating temperature.
Warning! Hot oil can scald. Avoid skin contact with engine oil. Applies in particular to contaminated engine oil. Immediately wash hands and
any skin that has been in contact with oil. Use a suitable cleaning agent and warm water. Wear protective gloves when working with engine oil.
Remove the oil filter housing
Install:
-
the oil plug. Tighten to 38 Nm . Always use a new sealing washer.
Position the container under the oil filter.
Remove the oil filter housing.
Use tool: 999 5679 Oil filter spanner See: Tools and Equipment/999 5679 Oil Filter Spanner
Replace the oil filter insert