C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Method is the same for both aspiration and turbo engines.
The engine compartment figures show a turbo engine.
These figures are not exactly correct since the air pump has been discontinued.
Remove
-
the control module box air baffle.
-
cover plate over the injectors.
-
the connectors from the injectors.
-
connectors for the sensors in plastic charge-air pipe between charge-air cooler and throttle module.
-
the cover over the ignition coils
Part the connector for the electronic throttle body.
Part the charge-air pipe at hose/plastic pipe.
Remove the plastic charge-air pipe.
Seal the opening.
Mark up and remove the vacuum hoses from the intake pipe.
-
the cover over the ignition coils
Remove the hose from the oil trap for the cam cover at the connection in the cam cover.
Remove the mounting screws from the fuel rail.
Part the fuel line's quick-coupling.
Use tool 951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced by 9997298.
Spray universal oil or similar around the injector nozzle at the connection on the intake pipe.
Gently work the fuel rail and injector nozzles loose
