C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
NOTE: Do not turn counter clockwise during this procedure.
-
Slacken off, but do not remove the screws which secure the timing gear pulley to the VVT unit.
-
Press the variable valve timing unit/timing gear onto the camshaft.
-
Install the center screw which secures the variable valve timing unit to the camshaft. Tighten slightly.
-
Turn the variable valve timing unit counter-clockwise as far as it will go. Slacken off the center screw.
-
Turn the timing gear pulley clockwise until the screws at the oval holes are in the limit position. Continue turning clockwise until the timing gear
pulley marking is 2 cogs before the marking on the upper timing cover.
Check that the timing gear pulley is still in the limit position in the oval holes. Tighten the center screw in the VVT unit.
Check that the variable valve timing unit does not rotate when tightening. Install and tighten the center plug.
