C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Front Crankshaft Seal: Procedures
Replacing The Oil Pump/Front Crankshaft Seal
Special Tools: 998 6187, 999 5433, 999 5455, 999 5919, 999 5747, 951 2050.
NOTE:
-
As the illustrations in the information are used for different model years and/or models, certain variations may occur. However, the essential
information in the illustrations is always correct.
-
If the oil pressure is low or if there is possibly a fault with the oil pump, measure the oil pressure.
Remove Engine Components
Remove:
CAUTION: Remove the ignition key from the ignition switch before beginning work.
-
the upper camshaft belt cover.
-
the servo reservoir and expansion tank.
Lift up and place on top of the engine.
NOTE: Ensure that no power steering fluid is spilled. It is extremely flammable.
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position The Engine According To The Marking
Raise The Car
