C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Front Crankshaft Seal: Removal and Replacement
Replacing the oil pump / front crankshaft seal
Special tools:
998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold
999 5455 PUNCH See: Tools and Equipment/999 5455 Punch
999 5919 PULLER See: Tools and Equipment/999 5919 Puller
999 5919 PULLER See: Tools and Equipment/999 5919 Puller
999 5919 PULLER See: Tools and Equipment/999 5919 Puller
Note! As the illustrations in the information are used for different model years and / or models, certain variations may occur. However, the
essential information in the illustrations is always correct.
Note! If the oil pressure is low or if there is possibly a fault with the oil pump, measure the oil pressure.
Remove engine components
Remove
Caution! Remove the ignition key from the ignition switch before beginning work.
-
the upper camshaft belt cover.
-
the servo reservoir and expansion tank.
Lift up and place on top of the engine.
Note! Ensure that no power steering fluid is spilled It is extremely flammable!
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position the engine according to the marking
