C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Oil the new seal. Install the new seal for the exhaust camshaft. Use drift 999 5718.
Installation
NOTE: The purpose of the procedure, "Installing the VVT unit/timing gear pulley", described here is to ensure that the VVT unit is correctly positioned
and to reset the camshaft timing gear pulley to the correct position using the markings made at the factory. This is to ensure that the conditions are
correct for any later fault-tracing.
Setting The Crankshaft Position
-
Install camshaft adjustment tool
-
Remove the charge air pipe between the throttle body (TB) and the charge air cooler
