C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
the oil inlet pipe.
Note! Install new copper washers for coolant pipes and for upper oil pipe.
-
the clamp between the pipes
-
the coolant pipes, for inlet and outlet.
Remove the clamping pliers.
-
the fresh air intake hose.
-
inner heat shield plate.
-
the charge air pipe over the engine.
-
the heat shield plate over the turbo.
Raise the car .
Test the function:
Test drive the engine.
Check the boost pressure Wastegate valve, adjusting, B5234T9, B5244T7 See: Powertrain Management/Fuel Delivery and Air
Induction/Turbocharger/Wastegate Actuator/Adjustments.
Check oil and coolant levels.
Wipe the engine compartment clean.
Ensure that the steering wheel and gear selector lever are clean.
