C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Fuel Pressure Pulsation Damper: Procedures
Replacing Injectors And Pulsation Dampers
Special Tools: 951 2666
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Preparation
Empty the fuel injection system according to Draining the fuel system.
Remove the cover over the fuel rail.
Disconnect the injector connectors.
Blow clean around the injectors.
Remove the mounting screws from the fuel rail.
Separate the fuel line quick-release connector. Use tool 951 2666.
Spray universal oil or similar around the injector terminals on the intake manifold.
Pull out the fuel rail and injectors. Do not work them loose from side to side.
NOTE: Handle the injectors carefully to avoid damage to the nozzles and needles.
Removing injectors and pulsation dampers
