C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
the screws holding the mounting rail to the fuel rail
-
the mounting rail
-
the injector and the pulsation damper.
CAUTION: All the injectors must be replaced at the same time (sold in sets). This is to ensure that the emission levels are correct.
Installing injectors and pulsation dampers
Lubricate the injector O-rings with lubricant 116 1580.
Install the new injector.
Installing the pulsation damper
Lubricate the new pulsation damper O-ring with lubricant 116 1580.
Install the new pulsation damper.
Installing the mounting rail
Position the mounting rail. The injectors may need to be pulled away from the fuel rail a few millimeters to install the rail.
Tighten the mounting rail to the fuel rail.
Finishing