C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Use tool 999 5457.
Install
-
the counterhold (1) on the upper side of the bushing
-
the cutting sleeve (3) and the screw with nut (6) from underneath.
Tighten the cutting sleeve until it stops against the counterhold. The cutting sleeve is now fixed in the bushing.
Remove the counterhold.
Position the threaded plate (2) above the bushing.
Install the spacer sleeve (5) and the screw with the nut (6) from underneath.
Pull out the inner section of the bushing using the cutting sleeve.