C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Disconnect the wiring harness from the sub-frame.
-
Remove the exhaust pipe bracket and twist it to one side.
-
Unhook the muffler from the rubber mountings.
-
Position a lifting table (minimum capacity 500 kg) under the sub-frame so that the engine/transmission unit cannot twist or slide.
-
Apply the lifting table so that the load is taken off the sub-frame screws.
-
Remove the sub-frame screws together with the accompanying brackets and washers.
-
Carefully lower the engine/transmission unit approximately 90 mm.
Removing the bushings for the sub-frame
