C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Install the screws for the trailing arm bracket loosely
-
Use new screws.
Tighten the screws:
A. First tighten the screw through the rear axle link bracket. Tighten to 105 Nm. Angle-tighten to 90 degree
B. Then tighten the three bracket screws. Tighten to 65 Nm. Angle-tighten to 60 degree
C. Finally tighten the nut on the screw for the trailing arm-rear axle link. Tighten to 65 Nm. Angle tighten to 120 degree.
Use bevel protractor 951 2050.
Install
-
the brake pipe on the mounting clip
-
the screw for the sound damper bracket.