C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Pry down the link on the left-hand side from the locating pin in the bodywork. Use a jimmy bar.
-
Ensure that the trailing arm link is free of the locating pin in the bodywork.
Install press tool 999 5497 on the trailing arm
Press the bushing out
Installation
NOTE:
-
Ensure that there is no exhaust leakage.
-
Turn the bushing using the large inner diameter on the inner sleeve towards the bodywork.
Press the new rear axle link into place
-
Use the same tool as when removing.
Remove the tool. Install a new mounting screw and nut on the rear axle link in the trailing arm. Do not tighten the nut yet
Install the trailing arm on the locating pin on the bodywork