S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Insert a cloth between the handle and the handle housing to avoid cracking.
Position the handle housing with the mounting in a vise.
Carefully tap the pin through the handle (and handle housing) until the top of the pin is positioned next to the mounting for the handle housing.
Secure the spring (A) behind the handle arm.
Locking
Use cutting pliers and clamp the end on the pin so that the two instructions are at 180° to each other.
Check that the pin cannot be pulled out.
Spray rustproofing over the instructions on the pin.
Note! Do not damage the paint when installing the handle.