S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Check the mating surface for the connecting socket. The socket must be replaced if there are signs of grooves or corrosion.
Installing the connecting socket
Heat the socket to 150°-175°C in an oven. Place the socket in drift 999 5778. Install the drift in the transmission and tap the socket until it engages in
the differential.
The above operation must be carried out quickly to prevent the heat spreading to the differential and causing the differential to expand.
Control measurement: the distance from the end of the connecting socket to the flat surface outside the sealing ring seat on the transmission housing
must be approximately 41 mm.
Note: Use protective gloves when handling the heated socket.
Care must be also taken to prevent burns in the remaining operations.
Installing the sealing ring for the connecting socket